Accessories; Connecting Cable - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Overview

1.3 Accessories

1.3 Accessories
1.3.1

Connecting cable

The Mobile Panel 277 RO is compatible with the connecting cable PN:
①
②
③
④
Connect the connecting cable to the Mobile Panel 277 RO so that it is not detachable. The
connection to the connection box PN Plus is achieved by means of a detachable connector.
The connecting cable PN is an industrial cable and is therefore resistant to many solvents
and lubricants. The flexural strength of the connecting cable is geared to the actual usage
conditions.
Note
Degree of protection
When inserted, the circular connector guarantees IP65 degree of protection..
Ordering information
The connecting cable PN is not included with the HMI device. The connecting cable PN is
available in various lengths under the following article numbers:
Length of the connecting cable
5 m
10 m
25 m
12
Metallic push-pull circular connector
Strain relief and antikink device for the connecting cable
RJ45 connector
Plug connector, 12-pin
Article number
6XV1440-4BH50
6XV1440-4BN10
6XV1440-4BN25
Operating Instructions, 10/2015, A5E36824256-AA
Mobile Panel 277 RO