User Access-Control Ip-Based; User Access-Control Mac-Based - TP-Link JetStream TL-SL3452 Reference Manual

TL-SL3428(config)#user name tplink password password type admin status
enable

user access-control ip-based

Description
The user access-control ip-based command is used to limit the IP-range of
the users for login. Only the users within the IP-range you set here are allowed
to login. To cancel the user access limit, please use no user access-control
command.
Syntax
user access-control ip-based ip-addr ip-mask
no user access-control
Parameter
ip-addr —— The source IP address. Only the users within the IP-range you set
here are allowed to login.
ip-mask ——The subnet mask of the IP address.
Command Mode
Global Configuration Mode
Example
Configure that only the user with the IP address 192.168.0.148 is allowed to
login:
TL-SL3428(config)#user access-control ip-based 192.168.0.148 255.255.255.255

user access-control mac-based

Description
The user access-control mac-based command is used to limit the MAC
address of the users for login. Only the user with this MAC address you set here
is allowed to login. To cancel the user access limit, please use no user
access-control command.
Syntax
user access-control mac-based mac-addr
TL-SL3428/TL-SL3452
43
JetStream L2 Managed Switch CLI Guide