Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452
Verifying the IP and Default Gateway Addresses
Ensure that the IP address and the default gateway were properly assigned by
executing the following command and examining its output:
Gateway IP Address
----------------------------------------------------------
----
192.168.1.1
IP address
-------------------
192.168.1.123/24
4.4.1.3 User Name
A user name is used to manage the device remotely, for example through
SSH, Telnet, or the Web interface. To gain complete administrative (super-user)
control over the device, the highest privilege (15) must be specified.
Note
Only the administrator (super-user) with the highest privilege level (15) is
allowed to manage the device through the Web browser interface.
For more information about the privilege level, see the CLI Reference Guide.
The configured user name is entered as a login name for remote management
sessions. To configure user name and privilege level, enter the command at
the system prompt as shown in the configuration example:
console> enable
console# configure
console(config)# username admin password admin level 15
Gigabit Managed Switch Family Installation Guide
Activity status
---
Active
Interface
----------------
VLAN 1
30
Type
--------
Static
Hide quick links:
Advertisement
Table of Contents
