Gvrp Registration; Gvrp Timer - TP-Link JetStream TL-SL3452 Reference Manual

Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)
Example
Enable the GVRP function for Fast Ethernet ports 2-6:
TL-SL3428(config)#interface range fastEthernet 1/0/2-6
TL-SL3428(config-if-range)#gvrp

gvrp registration

Description
The gvrp registration command is used to configure the GVRP registration
type for the desired port. To restore to the default value, please use no gvrp
registration command.
Syntax
gvrp registration { normal | fixed | forbidden }
no gvrp registration
Parameter
normal | fixed | forbidden —— Registration mode. By default, the registration
mode is "normal".
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEhternet)
Example
Configure the GVRP registration mode as "fixed" for Fast Ethernet ports 2-6:
TL-SL3428(config)#interface range fastEthernet 1/0/2-6
TL-SL3428(config-if-range)#gvrp registration fixed

gvrp timer

Description
The gvrp timer command is used to set a GVRP timer for the desired port. To
TL-SL3428/TL-SL3452
34
JetStream L2 Managed Switch CLI Guide