Show Dot1X Global; Show Dot1X Interface; Show Radius Authentication - TP-Link TL-SG5412F Reference Manual
24-port gigabit l2 managed switch with 4 sfp slots; 12-port gigabit sfp l2 managed switch with 4 combo 1000base-t ports
Hide thumbs
Also See for TL-SG5412F:
- User manual (257 pages) ,
- Cli reference manual (239 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
show dot1x global
Description
The show dot1x global command is used to display the global configuration of
801.X.
Syntax
show dot1x global
Command Mode
Any configuration Mode
Example
Display the configuration of 801.X globally:
TP-LINK(config)# show dot1x global
show dot1x interface
Description
The show dot1x interface command is used to display the port configuration of
801.X.
Syntax
show dot1x interface [ ethernet port-num ]
Parameter
port-num ——The number of the Ethernet port. Display the configuration of all
the ports by default.
Command Mode
Any configuration Mode
Example
Display the port configuration of 801.X:
TP-LINK(config)# show dot1x interface
show radius authentication
Description
87
Hide quick links:
Advertisement
Table of Contents
