Table of Contents
Advertisement
Setting up the pedals, audio connections, music stand |17
Use either the
LEFT
or
RIGHT
connector to output a mono signal.
Adjust the output level with the
MASTER VOLUME
knob.
If they are not deactivated, the integrated speakers will work in parallel with
the main audio outputs.
Installing the music stand
A music stand comes with your Pa1000. Insert its legs into the two dedicated
holes on the rear panel, as shown in the following illustration. Please note
that the latest 0,5 cm (0.2") require more strength to fit. Push harder, until
you feel a 'click' and the legs are completely inserted.
Advertisement
Table of Contents
