Table of Contents
Advertisement
18| Let's start!
03
Powering up
turning the instrument on
Connecting the power cable
Plug the supplied power cable into the
strument, and the cable plug into a wall power socket.
When the cable is connected, the instrument is in standby.
Warning:
When the instrument is in standby, it is still connected to the power line.
Accessing the inside of the instrument can be dangerous. To completely disconnect
the instrument from the power, unplug the power plug from the power socket on the
wall.
Turning the power on or off
Turn the instrument on
▪
Press the
POWER
standby'). After you turn the instrument on, wait for the welcome screen to
disappear, then the main page of the Style Play mode will be shown in the
display.
Turn the instrument off (standby)
▪
Keep the
POWER
it when the screen appears dimmed. The shutdown procedure will begin and
last for a few seconds. Please do not disconnect the power cable during this
procedure.
(
) button to turn the instrument on (that is, 'exit from
(
) button pressed for about one second, then release
AC IN
socket on the back of the in-
Advertisement
Table of Contents
