Table of Contents
Advertisement
HUAWEI VP9050 Executive Video Terminal
User Guide
Parameter
Dialing mode
Step 2 Save the settings.
----End
3.4.3 Setting 3G Dial-up Parameters and Establishing a Dial-up
Connection
After a PPP dial-up connection is established, the terminal can obtain the IP address allocated
by the server and can make calls over the 3G network.
Before connecting to the 3G network, ensure that:
To set the terminal's 3G dial-up parameters, do the following:
Step 1 Choose Settings > Network > 3G > 3G Dialing, and then set the parameters listed in Table
3-10.
Table 3-10 3G dial-up parameters
Parameter
Switch to
3G network
USB device
APN
Number
Issue 03 (2011-12-10)
Description
The default value is Manual.
Auto: If this option is selected, the terminal initiates a PPP dial-up
connection automatically. The billing system starts charging after the
dial-up connection is established successfully. If you use the monthly fee
mode, using the automatic mode for the PPP dial-up connection is
recommended.
Manual: If this option is selected, the terminal does not initiate the PPP
dial-up connection automatically. If you pay the fee based on connection
duration, using the manual mode for the PPP dial-up connection is
recommended.
The terminal is connected with a 3G data card successfully.
The 3G network is enabled.
Description
This specifies the 3G network operator.
Click Search to search for the existing 3G network operators.
This specifies the type of the data card. The available options are Wideband
Code Division Multiple Access (WCDMA) and CDMA2000.
This specifies the name of the network access point. If a WCDMA data card
is used, you must set this parameter.
For details, contact your operator.
This specifies the number used to connect to the 3G network. If a WCDMA
data card is used, you must set this parameter.
For details, contact your operator.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Network Settings
24
Advertisement
Table of Contents
Troubleshooting
