Table of Contents
Advertisement
HUAWEI TP3106-55 Telepresence
User Guide
3.1 Powering On the Touch panel
Procedure
Step 1 Check that the touch panel is connected to a power supply.
The battery life is limited. Therefore, connect the touch panel to a power supply using the power adapter for
long-duration conferences.
Step 2 Press and hold the power key for at least two seconds.
----End
3.2 Setting Connection Parameters
Context
When you log in to the touch panel for the first time, set the parameters of the wireless network
and telepresence host.
1.
2.
Issue 02 (2013-01-16)
NOTE
Tap Apps on the touch panel. On the displayed application screen, t Settings > Wireless
& networks and tap WLAN to allow the touch panel to automatically search for wireless
networks.
Tap WLAN Settings. On the displayed WLAN networks screen, tap the desired and
connected wireless network under WLAN networks. To connect to an unconnected
wireless network, set the parameters described in
Table 3-1 WLAN connection parameters
Parameters
Description
Network
Set it to Manual.
settings
Password
Specifies the login password for the wireless network. The default
value is 22rTP3106-55.
Proxy settings
Set it to None.
IP settings
Set it to Static.
IP address
Specifies the internal IP address of the touch panel, for example,
172.16.21.65.
Network prefix
Specifies the length for the internal IP address subnet mask, for
length
example, 24.
Gateway
Specifies the IP address of the wireless router, for example,
172.16.21.64.
DNS
Specifies the IP address of the domain name server (DNS), for
example, 8.8.8.8.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Using the Touch Panel
Table
3-1.
19
Advertisement
Table of Contents
