Save And Apply Changes; Make Your First Call; Figure 10: Ucm61Xx Web Gui Language - Grandstream Networks UCM6102 User Manual

SAVE AND APPLY CHANGES

Click on "Save" button after configuring the web GUI options in one page. After saving all the changes,
make sure click on "Apply Changes" button on the upper right of the web page to submit all the changes. If
the change requires reboot to take effect, a prompted message will pop up for you to reboot the device.

MAKE YOUR FIRST CALL

Power up the UCM61xx and your SIP end point phone and connect both to network. Then follow the steps
below to make your first call.
1. Log in the UCM61xx web GUI, go to PBX->Basic/Call Routes->Extensions;
2. Click on "Create New User" to create a new extension. You will need User ID, Password and Voicemail
Password information to register and use the extension later;
3. Register the extension on your phone with the SIP User ID, SIP server and SIP Password information.
The SIP server address is the UCM61xx IP address;
4. When your phone is registered with the extension, dial *97 to access the voicemail box. Enter the
Voicemail Password once you hear "Password" voice prompt;
5. Once successfully logged in, you will be prompted with the Voice Mail Main menu;
6. You are successfully connected to the PBX system now.
Firmware Version 1.0.1.22

Figure 10: UCM61xx Web GUI Language

UCM6102/6104/6108/6116 USER MANUAL Page 25 of 138