Web Gui Languages; Save And Apply Changes; Make Your First Call; Figure 11: Ucm6100 Web Gui Language - Grandstream Networks UCM6100 Series User Manual


Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot,
syslog setup and troubleshooting.

WEB GUI LANGUAGES

Currently the UCM6100 series web GUI supports English, Simplified Chinese, Traditional Chinese,
Spanish, French, Portuguese, Russian, Italian, Polish, German and etc.
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after
logging in.

SAVE AND APPLY CHANGES

Click on "Save" button after configuring the web GUI options in one page. After saving all the changes,
make sure click on "Apply Changes" button on the upper right of the web page to submit all the changes. If
the change requires reboot to take effect, a prompted message will pop up for you to reboot the device.

MAKE YOUR FIRST CALL

Power up the UCM6100 and your SIP end point phone. Connect both devices to the network. Then follow
the steps below to make your first call.
1. Log in the UCM6100 web GUI, go to PBX->Basic/Call Routes->Extensions.
Firmware Version 1.0.10.39

Figure 11: UCM6100 Web GUI Language

UCM6100 Series IP PBX User Manual Page 45 of 331