Call Recording; Figure 81: Download Recording File From Cdr Page - Grandstream Networks UCM6510 IP PBX User Manual

Direct Dial Voicemail Prefix

CALL RECORDING

The UCM6510 allows users to record audio during the call. If "Auto Record" is turned on for extension or
trunk, the call will be automatically recorded when there is established call with the extension or trunk.
Otherwise, please follow the instructions below to manually record the call.
 Make sure the feature code for "Audio Mix Record" is configured and enabled.
 After establishing the call, enter the "Audio Mix Record" feature code (by default *3) followed by # or
SEND to start recording.
 To stop the recording, enter the "Audio Mix Record" feature code (by default *3) followed by # or
SEND again. Or the recording will be stopped once the call hangs up.
 The recording file can be retrieved under web GUI->Status->CDR. Click on
or click on to download the recording file.
The above recorded call's recording files are also listed under the UCM6510 web GUI->CDR->Recording
Files.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
pick up the call.
Default Code: *
This code is for the user to directly dial or transfer to an
extension's voicemail.
For example, directly dial *5000 will have to call go into the
extension 5000's voicemail. If the user would like to transfer the
call to the extension 5000's voicemail, enter *5000 as the
transfer target number.

Figure 81: Download Recording File from CDR Page

UCM6510 IP PBX User Manual
to play the recording
Page 172 of 229