Table of Contents
Advertisement
2.3
Display Features
When the Model 3910 is switched ON, page 1 is displayed automatically:
Hold down the PAGE button to display page 2:
To return to page 1, release the PAGE button
2.4
Button Functions
2.4.1 PEAK Button
When this button is activated, PEAK values of a measurement can be
displayed.
To activate the PEAK mode, press the PEAK button once. The Model
3910 changes initially to peak current measurements and "PEAK A" is
displayed.
Press the SEL button to choose the desired parameter (A, W, V). The SEL
button can only be used after the PEAK button has been activated.
NOTE: The peak measurement is:
•
the maximum value for the current (A)
•
the maximum value for the active power (W)
•
the minimum value for the voltage (V)
TRMS Power Meter Model 3910
• RMS voltage (V)
• RMS current (A)
• Active power (W)
• Power factor (pF) (or Cos Φ)
• Reactive power (Var)
• Apparent power (VA)
• Frequency (Hz)
Advertisement
Table of Contents
