Attaching The Identification Label; Configuring The Network Node - Siemens ARCADIS Orbic Installation And Startup Manual

10

Attaching the identification label

Fig. 8:
•
Attach the identification label 75 51 828 to the unit as shown in the illustration.

Configuring the network node

•
Switch on the system.
•
Click <Options> - <Service> - <Local Service>.
•
Enter the password and click <ok>.
•
Click <Configuration>.
•
"Attached to Network" and "Dicom Networking" must be selected.
•
Click <Next>.
ARCADIS Orbic
Label
SPR2-320.814.03.02.02
06.05
Installation and settings
Page 10 of 16
CS SD 24
0
0
Siemens AG
Medical Solutions