Adjusting The Print Density - Canon LBP 3370 User Manual

Adjusting the Print Density

Adjust the print density using the following procedure when the printout result is too
dense or too light in color. The toner density is set to the standard density (4) before
shipment. You can adjust the toner density between 1 and 16.
1
2
7
3
4
7-18

Adjusting the Print Density

Press the (Settings) key.
SETUP
CONTROL MENU
Select QUALITY MENU using [
QUALITY MENU
IMGE REFINEMENT→
The item for QUALITY MENU is displayed.
Select DENSITY using [
DENSITY
=4
The setting value for DENSITY is displayed.
Specify the target numeric value using [
press [OK].
Pressing [ ] decreases the value, and the print density becomes lighter.
Pressing [ ] increases the value, and the print density becomes denser.
6
=6
"=" is displayed on the left of the value, and the density is specified.
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→
→
→
→
] and [ ], then