Ipv6 Ready Logo; Weee Directive; R & Tte Directive - Canon IMAGERUNNER ADVANCE 6075 User Manual

IPv6 Ready Logo

WEEE Directive

European Union (and EEA) only.
These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive
(2002/96/EC), the Battery Directive (2006/66/EC) and/or your national laws implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this indicates that
a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a concentration above an
applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy
a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling of this type of waste could have a possible impact on the environment and
human health due to potentially hazardous substances that are generally associated with EEE.
Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources.
For more information about the recycling of this product, please contact your local city office, waste authority, approved
scheme or your household waste disposal service or visit
www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
R & TTE Directive
The fax function is available only if the FAX Board is installed.
xvi
The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-1established
by the IPv6 Forum.
This equipment (F155100) conforms with the essential requirements of EC Directive 1999/5/EC and
is usable in EU.
We declare that this product conforms with the EMC requirements of EC Directive 1999/5/EC at
nominal mains input 230 V, 50 Hz although the rated input of the product is 220 V-240 V, 50/60 Hz.
Use of shielded cable is necessary to comply with the technical requirements of EMC Directive. If you
move to another EU country and are experiencing trouble please call the Canon Help Desk.
(For Europe Only)
Canon Inc./Canon Europa N. V.