Specific Options; Irg Descriptor - Promax HD RANGER 2 User Manual

5.4

Specific Options

Analogue Signal
►
This option is available only if the detected or selected signal is ANALOGUE.
Pressing the
antenna (via RF connector) and external (via V/A input connector).
To get an external analogue signal use the A/V input (see
Aspect Ratio
►
This option is available only if the detected or selected signal is ANALOGUE.
It allows the user to select the image aspect ratio (4:3; 16:9).
Advanced
►
It gives access to two options:
Audio:
TS Data:
5.5

IRG Descriptor

The analyser is compatible with IRG recommendations and it can extract the
Carrier ID information and display it conveniently showing all the details.
This information is useful to identify the interference, thanks to the carrier ID.
This identifier provides enough information to detect the interference source
(customer name, contact data, geo coordinates, etc.) and allows the operators to
communicate directly with the RFI source to resolve the incident.
5-60
key it allows selecting the type of analogue input, between
It allows the user to select among the audio tracks available.
It shows the IRG data descriptor. If the signal contains this
carrier identifier, this option will be enabled. If the signal
does not contain this identifier, the option will be disabled
(for more information refer to section "IRG descriptor").
1
figure 5).
June 2014