Promax HD RANGER 2 User Manual page 111

During datalogger, it catches the list of available services of all
channels in the channel plan that are part of the datalogger (if this
option was selected when creating the datalogger or if the "Datalogger
PSI" option is enabled in the Preferences menu). If there is a change
of channel plan during datalogger there will be a pause (if this option
was selected when creating the datalogger). User can pause and
resume the datalogger process at any time by pressing on the key
"Pause"
At the end it saves the data and allows watching the results on screen
by channel plan. To change the channel plan press on the
It is also possible to download Datalogger files to a PC by the
NetUpdate software (free download on the PROMAX website). Once
downloaded, the program can generate reports with these files. This is
not possible with the datalogger files exported directly to a USB
(without using NetUpdate).
Information of Service lists are in the XML files downloaded to the PC.
Description of Datalogger screens
►
The following describes the datalogger screen:
Selected installation; date and time.
Current datalogger name.
Selected band; battery level.
Exploring the spectrum in real time.
Level/Power, C/N ratio, MER, time remaining to identify a channel,
elapsed time since the start of the channel identification.
Softkey menus.
June 2014
.
Figure 68.
2 2
key.
7-103