Promax HD RANGER 2 User Manual page 187

Remote commands table
A4.5
Remote Commands
CAPTURE
EQUIPMENT POWER
OFF
EQUIPMENT SN
INSTALLATION
INSTALLATION
CURRENT
INSTALLATION
CURRENT CLEAR
INSTALLATION
CURRENT REMOVE
INSTALLATION
DEFLATE
INSTALLATION FILE
INSTALLATION FILE
ZIP
INSTALLATION
INFLATE
INSTALLATION PC
FILE
INSTALLATION PC ZIP
INSTALLATION
REMOVE
INSTALLATION ZIP
LNB
LTE
MEASURE
MODE
NAM
PRINT SCREEN
PSI
RTC
SIGNAL
SPECTRUM
TUNE
TUNE CH
TUNE PLAN
VER
VIDEO
36
Short Description
It makes and read screen captures.
It shutdowns the equipment
It provides the serial number of the equipment
It provides information about all the installations
It provides information about the current installation
It removes all files of the current installation. The
installation itself is not remove, only its contents
It removes the files of the same type in the current
installation
It compresses the installation, if it exists. If is the
current installation, it changes to DEFAULT installation
before the compression
It reads an "xml" file of the current installation and
sends it to a PC
It reads an "xml" file of the current installation and
sends all the installation files zipped to a PC
It decompresses the installation, it it exists
It sends a file of the current installation to the PC
It sends a file from a PC to the equipment zipped with
all files of the installation
It removes an installation
It receives the installation from the host
It provides / configures the LNB output
It provides / configures the LTE filter status
It provides information of all active measurements
It provides / sets the operation mode of the equipment
It provides the program name
It makes a screenshot in PNG format
It provides / configures services
It provides / sets date and time
It provides / configures the signal type
It configures the span and/or the reference level
It provides / configures the frequency
It provides / configures the channel
It configures a channel plan
It provides the version of the main software application
It configures the video source
4 4
June 2014