The following describes the Attenuation Test screen:
Installation selected, date and time.
Selected band; battery level.
Status message depending on the attenuation level.
Power level of the signal.
Signal Frequency (MHz).
Power level of the reference signal obtained when setting the reference
and used to calculate the attenuation level (dBµV).
Power level of the test signal at the user access point (dBµV).
Attenuation level (dB); Attenuation = Reference – Current.
Softkeys.
X-axis: Pilot signals
Y-axis: Power
Joystick: The joystick does not have any function in this tool.
►
June 2014
Figure 62.
2 2
7-93