Promax HD RANGER 2 User Manual page 91

The following describes the ECHOES screen:
Selected installation; date and time.
Selected band, battery level.
Main signal data: Frequency, Power and C/N.
ECHOES Diagram.
The display shows a graphical representation of the echoes. The
horizontal axis of the graph corresponds to the delay in receiving the
echo on the main path (the stronger signal).The vertical axis represents
the attenuation of the echo in dB on the main path.
Data box with main data regarding echoes.
In the list of echoes it shows the power, the delay in microseconds and
the distance in kilometres to the echoes.
Signal status (searching/locked/multiplex name).
Softkeys menus.
Joystick left/right (CHANNEL/FREQUENCY active mode): It changes the
►
channel/frequency (according to the tuning type selected).
Joystick up/down (ECHOES mode): It changes Zoom.
►
Remember to press the joystick to change the ECHOES mode to CHANNEL
mode.
June 2014
Figure 58.
1 1
7-83