The installation manager menu has four options linked with the softkeys. They
are described below:
Filter by type
►
►
►
►
►
►
►
File
►
►
►
►
June 2014
All:
On the list of files area it shows all type of files.
Screenshots:
On the list of files area it shows all available screenshots.
Channel Plans:
On the list of files area it shows all available channel plans.
Datalogger:
On the list of files area it shows all available dataloggers.
DiSEqC:
On the list of files area
commands.
Data Captures
On the list of files area it shows all available data captures.
Service Databases
On the list of files area it shows the service database
available.
Mark All:
It marks all files on the list of files area.
Unmark All:
It deselects all files on the list of files area.
Delete:
It deletes all selected files on the list of files area.
Copy to USB:
It saves selected files on the list of files area to an USB stick
connected to the equipment.
If the name of the file to be copied is greater than 8
characters the system cuts it. To keep the file names with
more than 8 characters it is recommended to export the
complete installation using the "Export to USB" option (see
"Tools" section).
The Datalogger files copied to the USB cannot be used to
generate reports by the NetUpdate program. To do this the
datalogger files must be exported directly through the
NetUpdate program (see the NetUpdate user's manual for
details).
it shows all available DiSEqC
2 2
9-115