Stealthid Function: Signal Auto-Identification - Promax HD RANGER 2 User Manual

To edit the file name user should follow these steps:
Place the cursor over the text box where the name appears.
Move the cursor to place it next to the letter that user wants to edit.
Press on the virtual keyboard to edit.
To delete a letter, move the cursor to the right side of the letter and then press
the joystick on the Delete key
To enter an upper case letter press first
upper case press
lower case press
Keys with a point at the top right corner give access to special characters, by
keeping pressed for one second on the key.
After editing press
(Cancel) to cancel.
2.8

StealthID Function: Signal Auto-identification

The StealthID function of the
performed automatically by the equipment without any user intervention.
The equipment tries to identify the channel or frequency of the input signal it
receives, and according to the band selected by the user, it applies identifying
criteria according to the standards of that band. When the equipment recognizes
in the input signal the identification parameters of a standard, it decodes the
signal and shows the data of that signal on the screen.
The identification system tries to lock the first signal using the modulation
defined in the channel plan for that signal. If after five seconds it fails to lock
with that modulation, it starts the wheel for automatic detection. If then it locks
in a modulation other than indicated, it generates an internal temporary channel
plan to accelerate tuning the same channel later on.
2-28
or press
or press on the
or the key again.
(Ok) to validate the name and continue the process or
HD
RANGER
(Del).
or press on the
key twice consecutively. To return to
is a signal identification function
2
5
key. To block
June 2014