Promax HD RANGER 2 User Manual page 46

Database
services:
Min. TER.
Power:
Min. SAT.
Power:
Min. TER.
Level:
Export button: It allows the user to select the data to be exported when
StealthID Options:
►
It allows the user to select the set of signal types being used while auto
identifying any modulation type. More information in the "StealthID function"
chapter.
Network Options:
►
Network parameters that user has to fill out in order to identify the equipment
into a data network. This is necessary to receive IPTV signal (refer to IPTV
chapter for more information). Network parameters are MAC, IP Address and
Mask.
Security Options
►
It allows the user to change the Pin Code that gives access the protected data
fields. The pin code by default is "1234".
2-38
When it is enabled, it saves all the services been
detected in the current installation. There is a database
for services in terrestrial band and another for services in
satellital band. Services are included automatically when
the signal is locked. If enabled, these services will be
displayed on the "View all services" option in the
Tuning menu. When disabling the option all services
in the database of the installation will be deleted.
It sets the minimum power for a terrestrial digital signal
to be identified.
It sets the minimum power for a satellite digital signal to
be identified.
It sets the minimum level for a terrestrial analogue signal
to be identified.
pressing the export key among the following options:
screen only, data only or both. More info in the "Export
key" chapter.
June 2014