Promax HD RANGER 2 User Manual page 71

In case of tuning by channel, it allows selecting a channel from the active
channel plan:
Place over the Channel option and press the joystick.
A box appears with all channels of the active channel plan and its
frequency.
Move the joystick on the box to select a channel.
When finished press joystick to save the selected value or any function
key to exit without saving.
The cursor will place on the selected channel and it will appear on the
The channel can be changed directly with the joystick in CH mode.
In case of tuning by frequency, the frequency can be edited:
Place over the Frequency option and press the joystick.
The option is highlighted in yellow to indicate it is in edit mode.
Move the joystick left/right to move between the figures and up/down
to change the figure.
When finished press joystick to save the selected value or any function
key to exit without saving.
The frequency can be changed directly with the joystick in FR mode.
Centre Frequency:
►
Place over the Frequency option and press the joystick.
The option is highlighted in yellow to indicate it is in edit mode.
Move the joystick left/right to move between the figures and up/down
to change the figure.
When finished press joystick to save the selected value or any function
key to exit without saving.
June 2014
option.
This option is available only for the Spectrum Analyser
mode. It displays the value of the central frequency on
the screen. To edit:
1 1
6-63