Lte Ingress Test; Description; Operation - Promax HD RANGER 2 User Manual

Tv & satellite analyser
Hide thumbs Also See for HD RANGER 2:
Table of Contents

Advertisement

7.3

LTE Ingress test

7.3.1

Description

Long Term Evolution is a new standard for mobile networks. This mobile
communication standard uses a frequency band close to the bands used by
television. For this reason it can cause interferences.
The LTE Ingress Test identifies this type of interferences in a television
distribution system, so that they can be compared on the same screen
measurements with LTE filter and without LTE filter and thus if there is any
interference it can be detected and take appropriate action to fix it.
7.3.2

Operation

The LTE Ingress Test input is available to all DIGITAL TERRESTRIAL
signals.
To access the LTE Ingress Test tool:
Connect the RF input signal to the equipment.
Tune a digital signal of the terrestrial band.
Enter the MEASUREMENT mode
Press the
Select the LTE Ingress Test mode.
Enable/disable the LTE filter pressing the key
The Lte icon
enabled.
This function displays measurements obtained with LTE filter or without LTE
filter. Measuring the signal with filter or without filter is not done
simultaneously, but alternately, by means of the
disables the filter.
June 2014
key (Tools).
on the screen upper right corner means the filter is
or SPECTRUM mode
: Filter ON/OFF.
key that enables or
1 1
.
7-79

Advertisement

Table of Contents
loading

Table of Contents