Promax HD RANGER 2 User Manual page 116

After the exploration the following screen appears:
The window is divided into three areas:
Spectrum and Measurement
It shows the cursor scrolling through each of the channels of the channel
plan. On the bottom of the screen the channel and frequency appears
next to the Power/Level and the C/N ratio.
Progress Bar
It shows the signal type detected and the scan progress in real time. At
the end a box shows a message informing the exploration process has
finished.
Channel plan
At the end of the process it shows the channels that have been detected
during the channel plan exploration. In parentheses shows the number of
detected channels to total channels of the channel plan. When moving
the cursor through the channels, the spectrum and measurement
windows are dynamically updated for the selected channel.
7-108
Figure 71.
2 2
June 2014