Promax HD RANGER 2 User Manual page 81

This function allows the user to compare between television services and to
check the bitrate used by each one. User can observe dynamically the
variation that when changing the transmission content. Another use may be to
identify the amount of null packets and therefore to know the amount of
available payload by the multiplex.
Screen Description:
►
Selected installation; date and time.
Selected function.
Selected band; Battery level.
Pie Chart. The graph represents and shows the percentage of each service
on the total bitrate for the tuned channel. The colours of the graph
correspond to the services detected. They are shown on the right side of
the screen. Services with a very low percentage are grouped with the
legend "Others".
Detected services. It shows all the services identified in the tuned multiplex
and the percentage of each service relating to the total bitrate.
Detail of the Selected Service: Service name and percentage related to the
total bitrate (bitrate/total bitrate).
Bar graph representing the bitrate percentage for each component (video,
audio, data).
Video bitrate, audio and data.
Softkey menus.
June 2014
Figure 54.
1
7-73