Ts-Asi Output; Ip Network - Promax HD RANGER 2 User Manual

Tv & satellite analyser
Hide thumbs Also See for HD RANGER 2:
Table of Contents

Advertisement

The RF Demodulators option (this option is available only if RF is
selected as a Signal Source) extracts the TS from the RF signal by
means of the internal RF demodulator. The RF signal can come from
digital terrestrial, satellite or cable.
The IPTV option (this option is available only if IPTV is selected as a
Signal Source) extracts the TS from the IPTV signal.
The ASI Input option gets the TS directly through the ASI-TS input
connector.
10.7.2

TS-ASI Output

It can transmit in packet mode or burst mode. User can use the transport stream
received by the equipment to feed the signal to other devices as well through the
TS-ASI output.
Operation
Press the Settings key
Select the ASI Output option. It allows the user to select the signal
source for the TS-ASI packets going out through the ASI Output. User
can select among Off, IPTV, RF demodulators and ASI Input.
The Off disables the ASI Output. If the RF Demodulators option (this
option is available only if RF is selected as a Signal Source) is selected,
the signal through ASI Output is the TS extracted from the RF signal
by means of the internal RF demodulator. The RF signal can come
from digital terrestrial, satellite or cable. If the IPTV option is selected
(This option is available only if IPTV is selected as a Signal Source),
the signal through ASI Output is the TS extracted from the IPTV
signal. The ASI Input option enables the TS-ASI packets coming from
ASI input connector go out through the ASI output connector.
10.8

IP network

Refer to IPTV chapter.
June 2014
to access the settings.
3
10-127

Advertisement

Table of Contents
loading

Table of Contents