Operation - Promax HD RANGER 2 User Manual

7.11.2

Operation

Settings
►
Press the "Management Installation"
"Preferences" menu.
Go to the label "Measures" and select your option in "Export
button". There are three options available: Screen Only, Data Only or
Screen+Data. "Screen Only" saves the screen image in PNG format.
"Data Only" saves measurement data on screen in a XML file format.
"Screen + Data" saves both screen and data.
Once selected, press
Capture
►
Press the Export key
screen to be captured. The LED next to key lights.
A progress bar shows the progress of the capture process. When
finished, the screen is captured and the LED is OFF.
Then the virtual keyboard appears with the default name assigned to
the file.
Edit the name if necessary (see section 2.7.4). Then press
end the capture or
Display
►
To
Management key
Select the installation where the capture was done and press
Manage.
Press
Captures" option. This will limit the list to the selected.
It appears a list of all the captures.
Move the joystick up or down to find the file to be displayed.
Leave the cursor on the file to be displayed. It appears a progress bar
that lasts a few seconds, depending on the size. Then the capture
appears.
7-106
: Cancel for cancellation.
display the captured
.
: Filter by type. Select the "Screen Shots" or "Data
key for one second to enter
to save changes and
for one second when on screen appears the
screen click
to exit "Preferences".
: OK to
on the Installations
June 2014
2 2
: