Generic Signal - Promax HD RANGER 2 User Manual

MEASUREMENT 3/3: MEASUREMENT + PARAMETERS
Selected installation, date and time.
Number of view/total views.
Selected band, battery level.
Demodulation parameters of the locked signal.
Measurement values for the type of locked signal.
Signal status (searching/locked/multiplex name).
Softkeys menus.
Joystick right/left
►
"Signals description" annex describes in detail the measurement parameters for
each type of signal.
3.4

GENERIC Signal

This a special digital signal that the equipment does not demodulate. It can be
used for special signals as DAB/DAB + or COFDM modulation with narrow BW.
In this type of signal the user can select the signal bandwidth by accessing the
"Signal Parameters" menu on the
The power measure and C/N ratio is calculated according to the bandwidth
selected by the user. The triple cursor shows on screen the BW selected by the
user.
3-42
Figure 37.
It changes the selected channel/frequency.
:
key.
7
June 2014