Promax HD RANGER 2 User Manual page 128

When finish you can remove the cable with the USB stick memory
directly from the equipment and connect it to a computer to view the
files copied.
Default files are copied to the root directory of the USB memory.
Screenshots appear with PNG extension and data with XML extension.
To export one or more complete installations:
Connect the CC-045 cable (USB (A) Female - Mini USB (A) Male) to
the mini-USB socket
Connect the USB stick to the female port of the cable.
USB icon should appear on the top right corner of the equipment. This
icon indicates that an USB stick has been detected at the port.
Press the Installations key and check the installations to export.
Press the key
A progress bar and a message indicates that the files are being copied
to the USB. The files are copied to the root directory of the USB in ZIP
format.
When finished, the cable can be extracted directly with the USB stick
and connect it to a computer to display the copied files.
Unzip the installation file to access the data.
To import one installation:
Connect the CC-045 cable (USB (A) Female - Mini USB (A) Male) to
the mini-USB socket
Connect the USB stick to the female port of the cable.
USB icon should appear on the top right corner of the equipment. This
icon indicates that an USB stick has been detected at the port.
Press the Installations key and check the installation to export.
Press de key
A dropdown menu shows the installations identified in the USB
memory. An installation can be imported if it has the same folder
structure than when exporting. Select the installation to import from
those available.
The import process starts. If the name of the installation matches with
an existing one, it gives a warning before import.
10-120
(see figure 5) of the equipment.
: Tools and select Export to USB.
(see figure 5) of the equipment.
: Tools and select Import from USB.
2
June 2014