Power; First Charge; Charging The Battery - Promax HD RANGER 2 User Manual

2.2

Power

The HD
RANGER
high quality and long operation time.
This equipment can operate on battery or connected to the mains using a DC
adapter. An adapter is also supplied to use with the power connector car
(cigarette lighter).
2.2.1

First charge

The equipment comes with the battery half charged. Depending on the time
elapsed from first charge and environmental conditions may have lost some of
the charge. You should check the battery level. It is advisable a first full charge.
2.2.2

Charging the battery

Connect the DC power adapter to the equipment through the power connector on
the left side panel (see figure 3).
Then connect the DC power adapter to the mains via the mains cord. Ensure that
your mains voltage is compatible with the adapter voltage.
For a fast charging of the battery is necessary to switch off the equipment.
If the equipment is ON, the battery charging will be slower, depending on the
type of work you are doing. When connecting the equipment to the mains the
mains connected symbol
2-4
2 is powered by a 7.2 V built-in rechargeable Li-Ion battery of
Figure 3.
appears inside the battery icon.
1
June 2014