Promax HD RANGER 2 User Manual page 212

Step 1. Capturing reference measurements.
►
Connect the SC pigtail end connector to the PROLITE-105 output
connector.
Connect the FC end of the pigtail to the optical input of the
HD
Turn on the PROLITE-105 and the
In the
screen, press
Select the FIBRE OPTIC TEST option and press the joystick.
In the PROLITE-105, press once the SEQ
SIMULTANEOUS mode. This mode simultaneously sends three
wavelengths signals.
In the
values are captured, which will be used as reference values.
Now, user can proceed to Stage 2 in order to measure the attenuation
at each user's access point.
June 2014
(see figure below).
2
RANGER
HD
RANGER
key to access the Tools menu.
HD
RANGER
Figure A5.4.
HD
, from the SPECTRUM or MEASUREMENT
2
2
, press the key Set Reference. All current
2
RANGER
.
key to select the
5 5
61