Promax HD RANGER 2 User Manual page 225

6 6
Description of signal coverage screen
A6.3.3
The following describes the Signal Coverage screen:
Figure A6.2.
Selected installation; date and time.
Spectrum.
Power measurement over time (shows span time).
MER and C/N measurement over time (shows span time).
Signal coverage started.
LNB, Selected band; battery level.
Signal information window 1:
Frecuency: frequency at which signal is locked; Profile (only for
DVB-T2 signals): Base or Lite; PLP identifier (only for DVB-T2 signals):
identifier of the layer being measured, TS Hierarchy (table hierarchy at
the transport stream) TS Priority (packet priority at the transport
stream).
Signal information window 2:
Power, C/N, MER measurements of the signal over time. It shows on
screen only the span time selected in settings.
74 June 2014