Ts Asi Input / Output; Ts-Asi Input - Promax HD RANGER 2 User Manual

Insert the CAM module in the Common Interface slot of the
equipment. The CAM module connector is located on the equipment
rear panel. Place the instrument on a stable surface and insert the
module so the printed arrow appears on visible upper face, pressing
until the extractor mechanism button becomes activated.
If the equipment detects the CAM module it shows a confirmation
message.
Press the Settings key
Select the Common Interface option.
By means of this option the user can navigate through the CAM
module menu.
To extract an inserted CAM module, press the button from extractor
mechanism and remove the module. If the equipment detects the CAM
module extraction it shows a confirmation message.
10.7

TS ASI Input / Output

It is an asynchronous serial interface. It is the serial standard used for MPEG-2
TS, in multimedia equipment interconnection:
Synchronous 270 Mbps data flow (up to 218 Mbps payload).
Differential signal over coax interface.
Allows
infrastructures.
10.7.1

TS-ASI Input

The TS-ASI option is a key feature. You can monitor and analyze streams coming
from satellite receivers, transport stream players, multiplexers, etc... It
automatically detects whether the stream is composed of 188 or 204 bytes.
Operation
►
Press the Settings key
Select the Decoder TS Input option. It shows up a menu to select the
transport stream coming into the equipment between the RF
Demodulators, IPTV and the ASI Input.
10-126
intermediate node
.
testing in broadcast
to access the settings.
3
and distribution
June 2014