Bottom view
2.4
Switching On/Off the equipment
This analyser is designed for use as a portable equipment and it does not require
any previous installation.
Switching On:
►
Slide for a while (approximately one second) the power slide switch
located on the left side of the equipment.
When all indicators light up at once release the switch, which returns to
its rest position.
The boot image (user can select the boot image from "Preferences"
menu) appears and also a progress bar that indicates the system load. At
the top left corner it shows the equipment model and the installed
software release detected.
After the system load, the last screen before shutdown appears.
June 2014
Figure 7.
2
2-9