Promax HD RANGER 2 User Manual page 83

Priority 1: High level security parameters. These are alarms that make
the TS vulnerable and avoid them to be received. The parameters at this
level must be correct for the TS to be decoded. If any of these parameters
fails the information cannot be recovered and therefore the signal cannot
be decoded.
Priority
recommended by DVB for continuous or periodic monitoring of TS and
ensure quality of transmission parameters. The alarm in any of these
parameters does not prevent the receiving but it is indicative of a possible
problem.
Priority 3: Low level security parameters. These are parameters that are
not harmful but are required for getting the most from the receiver
capabilities. They ensure that the receiver can extract in the best
conditions the TS information especially when there are additional features
such as the program guide or the services list.
Signal status (searching/locked/multiplex name).
Softkey menus.
Joystick up/down: It moves among alarms and highlights one on blue
►
Pressing the
►
Icons are:
►
June 2014
2: Medium level
background.
: Advanced key it shows the "Restart Analysis" option
which makes a new detection and updating of the TS
tables.
OK.
Warning.
Error.
security parameters.
1
These are alarms
7-75