Settings And Preferences - Promax HD RANGER 2 User Manual

Protocol: Available protocols are RTP and UDP. RTP (Real-time
Transport Protocol) is a higher level of communication that adds a time
stamp so that packets can reach destination at specific times and order.
Packets are processed with different priorities. It is usually used to
transmit video in real-time. UDP (User Datagram Protocol) is uses a
simple transmission model with a minimum of protocol mechanism. UDP
is suitable for purposes where error checking and correction is either not
necessary or performed in the application.
Recent Servers: The last servers used to send the data.
8.3

Settings and Preferences

Preferences
►
To access preferences press the
options tab to fill out the network options to identify the equipment into a data
network. This is necessary to receive IPTV signal. Network parameters are
MAC, IP Address and Mask.
Settings
►
The IPTV settings when pressing the settings
Signal Source: It allows the user to select the signal coming into the
equipment between the RF input for RF signal and the IPTV input. In this
case select IPTV.
Decoder TS Input: It allows the user to select the transport stream
coming into the equipment. In this case select IPTV.
ASI Output: It allows the user to select the way out for TS-ASI packets.
User can select among Off, IPTV and ASI Input. This transport stream
received by the equipment can feed the signal to other devices as well. In
the case of IPTV option the TS-ASI packets go out through the IPTV
connector.
June 2014
key for 1 second. Go to the Network
key are:
2 2
8-111