Promax HD RANGER 2 User Manual page 229

You must choose the option in which a stylesheet is asked. It will appear
as an option the "COVERAGE.xsl" file.
Now Excel is opening the XML data file using the format that the XSL file
is providing. This step could take few seconds depending on the size of
the XML data file.
At this point, you should have an excel file with three different sheets.
Each sheet corresponds to a different view of the same data:
The first one will show you the generic signal information and the
different coverage measures for each point acquired.
In the second one, you will find the same data but presented in a
table format, more user friendly for working with graphs based on
each measured parameter.
The third one provides data in a format adapted for geolocation.
Information is shown in terms of parameters required for presenting
the measured data as a map layer (latitude, longitude, id, description
and an icon identifier number) as required for GIS and Google Earth
technologies. This third sheet is formatted mainly to be compatible
with main Google Earth format converters available in Internet.
Now save the data as a true excel file. No specific name or path is
required, but you must remember the path.
78
Figure A6.6.
6 6
June 2014