Promax HD RANGER 2 User Manual page 37

5
Then, the user only has to follow these steps in order to identify a signal:
Press the Preferences key for 1 second.
In the StealthID tab, select the signal types to auto-identify (see "Menu
tree" figure 7). By default all them are selected. Press the key to save
the changes made and the key to exit the Preferences screen.
Press the Settings key.
Select the band (terrestrial or satellite).
Select a channel or frequency to identify.
The bottom of the screen shows the message "Searching for signal" and
the standard transmission checking. Wait a few seconds for the equipment
to identify the signal. User can force the auto-identification of a signal by
pressing the key and selecting the type of signal from the menu.
When the equipment identifies the signal a text shows the detected signal
type.
Press (Signal Parameters) to see the signal parameters.
2-29
June 2014