Screen Description - Promax HD RANGER 2 User Manual

2 2
7.9.2.2

Screen Description

The following describes the Signal Monitoring screen:
Figure 64.
Selected installation; date and time.
Spectrum.
Power measurement over time (shows span time).
MER and C/N measurement over time (shows span time).
Signal monitoring started.
LNB, Selected band; battery level.
Signal information window 1:
Frecuency: frequency at which signal is locked; Profile (only for
DVB-T2 signals): Base or Lite; PLP identifier (only for DVB-T2 signals):
identifier of the layer being measured, TS Hierarchy (table hierarchy at
the transport stream) TS Priority (packet priority at the transport
stream).
Signal information window 2:
Power, C/N, MER measurements of the signal over time. It shows on
screen only the span time selected in settings.
Signal information window 3:
Elapsed: Time elapsed since the beginning of the monitoring.
Samples: Samples taken since the beginning of the monitoring.
Space left: Space left in the memory to save data.
7-97
June 2014