Promax HD RANGER 2 User Manual page 223

Signal Coverage Analysis
A6.3
Operation
A6.3.1
The Signal Coverage tool is available for all signals.
Connect the GPS receiver to the equipment.
In Settings menu
Access the SPECTRUM mode and tune the signal for coverage study.
In case of tuning a DVB-T2 signal, in the Signal Parameters menu
select the Profile (Base or Lite) and the PLP identifier. User has to choose
one profile and one PLP identifier per each signal coverage analysis.
Press the Tools key
Select the Signal Coverage option.
The Signal Coverage function appears on screen.
Before starting the signal coverage analysis, access the Configuration
option in the Advanced menu
section).
After settings, access the Advanced menu
start the signal coverage analysis.
In Automatic mode, the equipment takes samples automatically
according to settings (see next section). In Manual mode each time the
user presses the joystick the equipment takes a sample. Measurement
are linked to the GPS reference.
Access the Advanced menu
coverage analysis. Data obtained is automatically stored.
Access the data by pressing the Installation List key
the monitoring data file has been saved. This file is a "Data Capture"
type. To manage the data, see below the section "Data File Processing".
72
select the terrestrial band.
.
for settings (more details in next
and press on Stop to finish the signal
and press on Start to
to check that
June 2014
6 6