Stealthid Function: Signal Auto-Identification - Promax HD RANGER+ Manual

2.8

StealthID Function: Signal Auto-identification

The StealthID
performed automatically by the equipment without any user intervention.
The equipment tries to identify the channel or frequency of the input signal it
receives, and according to the band selected by the user, it applies identifying
criteria according to the standards of that band. When the equipment recognizes
in the input signal the identification parameters of a standard, it decodes the
signal and shows the data of that signal on the screen.
The identification system tries to lock the first signal using the modulation
defined in the channel set for that signal. If after five seconds it fails to lock with
that modulation, it starts the wheel for automatic detection. If then it locks in a
modulation other than indicated, it generates an internal temporary channel set
to accelerate tuning the same channel later on.
Then, the user only has to follow these steps in order to identify a signal:
Press the Preferences key
In the StealthID tab, select the signal types to auto-identify (see figure 7).
By default all them are selected.
Press the Settings
Select the band (terrestrial or satellite).
Select a channel or frequency to identify.
The bottom of the screen shows the message "Searching for signal" and
the standard transmission checking. Wait a few seconds for the equipment
to identify the signal. User can force the auto-identification of a signal by
pressing the
When the equipment identifies the signal a text shows the detected signal
type.
Press
*
StealthID function for DVB-C only available for
has to enter the symbol rate in order the equipment detects the DVB-C signal.
April 2013
*
function of the
HD
key.
key and selecting the type of signal from the menu.
(Signal Parameters) to see the signal parameters.
is a signal identification function
+
RANGER/
for 1 second.
HD
RANGER
. For
+ HD
RANGER
, user
2-21