Riso RN SERIES Technical Manual page 95

CHAPTER 7. PAPER EJECTION SYSTEM
REMOVING THE TIMING ROLLER
(5) Remove the mounting screws (M3 x 8: 2 pcs) [F] from both the left- and right-hand Ejection wings [E],
and remove the ejection wings.
E
E: Ejection wings (left, right)
F: Mounting screws (M3 x 8: 2 pcs each)
[Precaution on Reassembly]
• Securely engage the spring [G] beneath the left-hand ejection wing.
• When mounting the ejection wings onto the shaft, mount them on the flat cut surface [H] of the shaft.
G: Spring
H: Flat cut surface
• Locate the Face cover [I] securely onto the half-pierce [J] before screwing on.
I: Face cover
J: Half-pierce
F
G
J
7 – 10
RN (Version 1.0)
E F
D
H
I