Riso RN SERIES Technical Manual page 264

CHAPTER 15. PANEL MESSAGES
DETAILS OF PANEL MESSAGES
Error type C02 [Replace master roll]
C02-***
Panel display No more masters.
Replace master roll.
Reset method Master loading sensor: OFF -> ON, and Master detection sensor: OFF -> ON.
Error point
200 Master end detected twice in succession at 10 ms interval check during master transport.
Error type C03 [Master disposal-box-full]
C03-***
Panel display
Empty master disposal box.
Reset method Disposal box full sensor to ON after switching OFF for 5 s.
Error point
308 Master disposal box detected as full by disposal box full sensor.
313 Master disposal box detected as full by software master count.
Error type C04 [No paper]
C04-***
Panel display
Set paper.
Reset method Paper detection sensor to ON.
Error point
402 Paper detection sensor was OFF.
Setting check errors
Error type D01 [Print drum not set]
D01-***
Panel display
Set print drum.
Reset method Print drum safety switch: ON, and Print drum set sensor: ON.
Error point
526 Print drum safety switch was ON and print drum set sensor was OFF on setting print drum.
527 Print drum safety switch was OFF.
Print drum set sensor does not go ON within 2 s after print drum safety switch goes OFF ->
546
ON on setting print drum.
Error conditions
Error conditions
Error conditions
Error conditions
15 – 14
RN (Version 1.0)