Data Check - Riso RN SERIES Technical Manual

CHAPTER 16. TEST MODE

DATA CHECK

5. Data Check
Press the "Start" key to display data.
* Data check only displays the various settings, and does not allow them to be changed.
No.
070 Data setting change confirmation
071 Set switch history
072 Error history
073 Maintenance count
074 Battery voltage (A/D)
075 Batter voltage (V)
270 TPH thermistor (A/D)
271 TPH thermistor (°C)
371 Removed master software count
470 Paper width (A/D)
471 Paper width (mm)
570 Print drum encoder count
571 Print drum angle
572 Ink temperature sensor (A/D)
573 Ink temperature sensor (°C)
Data
Lists Test mode No. and setting for non-default items during
data setting.
Displays error code (D**) for set switch that caused
operation to stop. (Most recent item)
Lists error codes for error codes occurring recently in
normal mode. (Max 8 codes)
Displays current maintenance count.
* Master count is in units of 100 (9999 = 999900).
Total count and print drum count are in units of 1000
(9999 = 9999000).
Displays residual battery voltage as (A/D).
Displays residual battery voltage as (V) * 1000.
Displays TPH thermistor AD value.
Displays TPH thermistor AD value converted to temperature
* 100.
Displays stored count.
Displays 10-bit data after A/D conversion.
Displays paper width (mm) after adjustment.
Displays encoder value.
Displays print drum angle.
Displays ink thermistor A/D value.
Displays ink thermistor A/D value converted to °C * 100.
16 – 10
RN (Version 1.0)
Display details