Backed-Up Errors - Riso RN SERIES Technical Manual

Error type E02 [Call technician]
E02-***
Time for periodic maintenance.
Panel display
Contact technician.
(Press lower right "Jam Reset" to continue operation.)
Reset method Jam reset
Error point
Number of masters completed reached value set in Test mode when power was switched
011
ON, reset, or operation ended.
Number of prints completed reached value set in Test mode when power was switched ON,
012
reset, or operation ended.
Maintenance counter inside print drum reached value set in Test mode when power was
022
switched ON, reset, or operation ended.
4.

Backed-up Errors

The following errors are backed up and are not cleared even when the power is switched off.
Error type
T01
T03
T13
T18
A02
A03
A04
A16
A17
C01
C02
C03
Error conditions
Main motor lock
Clamp motor lock
Cutter motor lock
Master mounting motor lock
Master mounting error
Cutting error
Master removal error
Awaiting master removal
Cutter fault
Replace ink cartridge
Replace master roll
Master disposal-box-full
15 – 17
RN (Version 1.0)
CHAPTER 15. PANEL MESSAGES
BACKED-UP ERRORS
Error details