Removing The Pickup Roller - Riso RN SERIES Technical Manual

2.

Removing the Pickup Roller

(1) Switch off the power and open the ADF unit. Now remove the two screws (M3 x 10), and remove the
ADF cover. Finally, close the ADF unit.
(2) Pull apart both ends of the Pickup roller frame ass'y [B] holding the Pickup roller [A], and remove the
Pickup roller [A]. (Take care not to drop the washer on the right-hand side gear of the Pickup roller.)
[Precautions on Reassembly]
• Do not forget to insert the washer on the right-hand side gear on the Pickup roller.
A: Pickup roller
B: Pickup roller frame ass'y
CHAPTER 12. ADF SCANNING SECTION
B A
12 – 13
RN (Version 1.0)
REMOVING THE PICKUP ROLLER
B