Removing The Vertical Centering Sensor - Riso RN SERIES Technical Manual

6.

Removing the Vertical Centering Sensor

(1) Remove the rear cover.
(2) Unplug the connector, remove the mounting screw (3 x 6: 1 pc), and then remove the Vertical
centering sensor [B] together with the Vertical centering sensor bracket [C].
[Precautions on Reassembly]
• Align the two faces of the Vertical centering sensor bracket [C] as shown in the photograph below.
Align faces.
A: Print-positioning base unit
B: Vertical centering sensor
C: Vertical centering sensor bracket
A
RN (Version 1.0)
CHAPTER 5. SECOND PAPER FEED SECTION
REMOVING THE VERTICAL CENTERING SENSOR
B
C
5 – 13